ANSA Liberty 4FT LONG cockpit designed Designed by Kyran Odore


Studio scale sci fi models from TV and Cinema these are all taken from 3d CGI models and then converted into STL files for printing. These are not resin molds or cast plastic there are 1st generation prototyping models taken from a 3d file and printed out . 3d printing : The model I make are printed out on cr-10 printers with a primary layer height of 0.1000 mm this is fine detailed setting for large scale printing with in practical time frame (parts can take weeks to print out ) . With 3d printing they are no resin parts / no copy of a copy / no warping or sink hole issues, however Even at this quality you still have visible lines with this PLA plastic. ABS is much finer but not stable and prone to warp and cracking during the process of printing and not good for production of large models like these. This is basically a plastic model with a honey comb structure between the layers as its builds up; it can tolerate temp; to 150 degrees before any warping might occur. It takes roughly 2 to 3.5 months to complete one model this includes the fine sanding and painting time; (this time frame is based on availability of the printers at the time of making your ordering it is first come bases ) I have currently 7 printers printing models 24 /7 and I am adding more printers all the time,


$550 
  • Shipping: